- FMT墊圈式力傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/17
Applications: Monitoring Blot Clamping for Bridges, Process Control Equipment, Robotics and Effectors, Laboratory and Research
Description: Measurement-Specialties’ washer load cell, model FMT, is designed to measure clamping and screwing forces. It is available in standard ranges from 0-4 klbf to 0-64 klbf.The sensor design reduces the hysteresis and sensitivity variations associated with torque generated by friction during tightening. The FMT has a high stiffness and can be used in static and dynamic applications. With many years of experience as a designer and manufacturer of sensors, Measurement-Specialties often works with customers to design or customize sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.
Features:
Full Scale Range from 20 kN to 320 kN [4 klbf to 64 klbf]
Compression
For Static and Dynamic Applications
Support Washer Provided
典型應用: 橋梁螺栓監控，過程控制，機器人末梢執行器，實驗室和研究機構
產品描述: MEAS的FMT墊圈式力傳感器專為測量夾固和擰緊力而設計。標準量程從0~4klbf 到 0~64 klbf。傳感器的特別設計減小了與在緊固過程中摩擦力產生的扭力相關的磁滯及靈敏度差異。FMT硬度高，適用于動態和靜態測量。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。
特點:
量程從 20 kN 到 320 kN（4 klbf 到 64 klbf）
測量壓力
適用于動態和靜態測量
配套供應支撐墊圈
FMT墊圈式力傳感器更多技術參數及規格書下載請瀏覽：http://www.gregorylane.net/sensors/590.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
- 如果本文收錄的圖片文字侵犯了您的權益，請及時與我們聯系，我們將在24內核實刪除，謝謝！
